Regviz

Freescale Semiconductor /MK52D10 /FTFL /FCNFG

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as FCNFG

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MK52D10/FTFL/FCNFG#0x0

7 43 0 0 00 0 0 0 0 0 0 0 0 (EEERDY)EEERDY 0 (0)RAMRDY 0 (PFLSH)PFLSH 0 (0)SWAP 0 (0)ERSSUSP 0 (0)ERSAREQ 0 (0)RDCOLLIE 0 (0)CCIE

RAMRDY=0, CCIE=0, RDCOLLIE=0, ERSAREQ=0, ERSSUSP=0, SWAP=0

Description

Flash Configuration Register

Fields

EEERDY

This field is reserved.
RAMRDY

RAM Ready

0 (0): Programming acceleration RAM is not available.

1 (1): Programming acceleration RAM is available.
PFLSH

Flash memory configuration

1 (1): Flash memory module configured for program flash only, without support for data flash and/or EEPROM
SWAP

Swap

0 (0): Physical program flash 0 is located at relative address 0x0000

1 (1): If the PFLSH flag is set, physical program flash 1 is located at relative address 0x0000. If the PFLSH flag is not set, physical program flash 0 is located at relative address 0x0000
ERSSUSP

Erase Suspend

0 (0): No suspend requested

1 (1): Suspend the current Erase Flash Sector command execution.
ERSAREQ

Erase All Request

0 (0): No request or request complete

1 (1): Request to: run the Erase All Blocks command, verify the erased state, program the security byte in the Flash Configuration Field to the unsecure state, and release MCU security by setting the FSEC[SEC] field to the unsecure state.
RDCOLLIE

Read Collision Error Interrupt Enable

0 (0): Read collision error interrupt disabled

1 (1): Read collision error interrupt enabled. An interrupt request is generated whenever a flash memory read collision error is detected (see the description of FSTAT[RDCOLERR]).
CCIE

Command Complete Interrupt Enable

0 (0): Command complete interrupt disabled

1 (1): Command complete interrupt enabled. An interrupt request is generated whenever the FSTAT[CCIF] flag is set.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data